Here’s a fun fall LEGO® project! Build some friendly jack o’lantern faces out of bricks and then illuminate them with battery powered tea lights.

There are several ways to design the face! Kids will enjoy giving this project their own personal touch. I have included a parts list at the bottom of the post, but encourage kids to be creative. If you don’t have that many orange bricks, it’s really fine to use any color or mix of colors.

Kids can build a door on the back for the lanterns so that it’s easy to turn the tea light on and off.

Such cute little faces! The curved bricks really make the mouths look good – I have details below on what bricks are needed to build these.

Turn off the lights and watch them glow! Your pumpkin lanterns will make a fall evening more cheery.

Ready to Build a Pumpkin Lantern?

I’ll share the instructions first, and then at the bottom of the post there is a list of the bricks needed in case you want to order parts for this project from Lego.com or Brick Link.

Step 1: Grab a 6 x 6 orange plate, eight 2 x 2 inverted slopes, and four 2 x 2 inverted slopes (double convex) for the corners.

Step 2: Place two 2 x 2 inverted slopes on each side of the 6 x 6 plate.

Step 3: Place the 2 x 2 double convex inverted slopes on each corner.

Step 4: Add a layer of plates on three of the sides. There are four 1 x 4 plates and two 1 x 2 plates.

Step 5: Start building the face by adding a 1 x 3 x 2 inverted arch on each side. Then place a 1 x 2 brick in the middle to make teeth. (The other face has a 1 x 1 brick and a 1 x 1 tile instead.)

Step 6: Add two rows of bricks on each side. Each side has a 1 x 3 brick, a 1 x 4 brick, a 1 x 1 brick, and a 1 x 6 brick.

Step 7: Build the top of the mouth with two 1 x 4 plates and two 1 x 1 bricks. (A 1 x 8 plate would be better, but we didn’t have one!)

Step 8: Add a row of bricks on all three sides. Then add a 1 x 2 slope, a 1 x 1 brick, another 1 x 2 slope, and a 1 x 2 brick.

Step 9: Add a 1 x 2 inverted slope, a 1 x 1 brick, another 1 x 2 inverted slope, and another 1 x 1 brick.

Step 10: Fill in the sides by adding two rows of bricks. I used two 1 x 6 bricks, a 1 x 1 brick, a 1 x 2 brick, and two 1 x 4 bricks.

Step 11: Cover the top of the pumpkin with a 6 x 6 plate, a 2 x 6 plate, and two 2 x 4 plates. Then add a 1 x 2 light gray plate with a handle, which will hold the door. Place a 2 x 3 plate right in front of that.

Step 12: Place two 2 x 4 plates on top of the 1 x 2 light gray plate to secure it.

Step 13: Finish off the top of the pumpkin by adding one 2 x 4 brick and and eight 2 x 3 slopes. Add a 2 x 2 lime green round brick for a stem.


Step 14: Build the door by attaching a 1 x 2 light gray plate with two clips to a 6 x 6 plate.

Step 15: Attach the door, and you’re ready to add your battery powered tea light!

This should go without saying, but don’t use a real candle. The battery powered tea lights don’t get hot, so they will be completely safe to use.

Another option is to build the pumpkin without the door. Just build walls on each side. It’s a little harder to take the tea light in and out to turn it on and off, but you’ll only need one 6 x 6 plate instead of three. Also, more light shows through the top of the lantern. You can see this in the photo at the top of the post.

Parts List:

3 – 6 x 6 orange plates

8 – 2 x 3 slopes

8 – 2 x 2 inverted slopes

4 – 2 x 2 inverted slopes, double convex

2 – 1 x 3 x 2 inverted arch

2 – 1 x 2 slopes

2 – 1 x 2 inverted slopes

1 – 2 x 4 brick

6 – 1 x 4 plate

2 – 1 x 2 plate

1 – 2 x 3 plate

4 – 2 x 4 plates

1 – 2 x 6 plate

11 – 1 x 4 bricks

3 – 1 x 2 bricks

10 – 1 x 1 bricks

2 – 1 x 3 bricks

2 – 1 x 6 bricks

1 – 1 x 2 light gray plate with a handle on the side

1 – 1 x 2 light gray plate with two clips on the side

1 – 2 x 2 lime green round brick

Have fun building! Looking for more fall LEGO® ideas? Check out our LEGO® bats and silly monsters.

Also, it’s time to pre-order Genius LEGO® Inventions with Bricks You Already Have! If your kids love building gadgets, they are going to LOVE our newest LEGO® book. It’s packed with 40 new projects with moving parts, plus tons of facts about science and mechanical engineering. LEGO® bricks + STEM! There’s so much to love about this!

The release date is November 13th. If you want to give this as a holiday gift, I would highly recommend pre-ordering as we have had trouble with Awesome LEGO Creations selling out during the holiday season!

Pre-Order Here: Genius LEGO® Inventions with Bricks You Already Have

LEGO® is a trademark of the LEGO® group of companies which does not authorize, endorse, or support this site.


1 Comments

Post a Comment
  1. Merit Sep 29, 2018

    Is is possible to get this in PDF form so I can print it for my child?

    Reply

    Post a Comment